2013

Leones, Rita Daniela Barros; Costa, C. M.; Machado, A. V.; Esperança, J. M. S. S.; Silva, Maria Manuela; Lanceros-Méndez, S. – Development of solid polymer electrolytes based on poly(vinylidene fluoride-trifluoroethylene) and the [N1 1 1 2(OH)][NTf2] ionic liquid for energy storage applications , 2013-12-09

Sepúlveda, A. T.; Villoria, R. Guzman; Viana, J. C.; Pontes, A. J.; Wardle, B. L.; Rocha, Luís A. – Full elastic constitutive relation of non-isotropic aligned-CNT/PDMS flexible nanocomposites , 2013

Esteves, F. R.; Carvalho, T. A.; Pouzada, A. S.; Martins, Carla I. – The influence of processing on the aesthetic, morphological and mechanical properties of structural foam mouldings of highImpact polystyrene , 2013-11

Araújo, Rui Filipe; Silva, Carlos J. R.; Paiva, M. C.; Melle-Franco, M.; Proença, M. Fernanda R. P. – Efficient dispersion of multi-walled carbon nanotubes in aqueous solution by non-covalent interaction with perylene bisimides , 2013

Azevedo, Gabriela; Hilliou, L.; Bernardo, Gabriel; Pinto, Isabel Sousa; Adams, Ralph W.; Nilsson, M.; Villanueva, R. D. – Tailoring kappa/iota-hybrid carrageenan from Mastocarpus stellatus with desired gel quality through pre-extraction alkali treatment , 2013

Mota, Armando R.; Duarte, L.; Rodrigues, D.; Martins, A. C.; Machado, A. V.; Vaz, F.; Fiedler, P.; Haueisen, J.; Nóbrega, J. M.; Fonseca, C. – Development of a quasi-dry electrode for EEG recording , 2013

Nogueira, A. A.; Gago, P. T.; Martinho, P. G.; Brito, A. M.; Pouzada, A. S. – Studies on the mouldability of structural foams , 2013-10

Brovelli, Claudio; Hilliou, L.; Hemar, Yacine; Pais, Jorge C.; Pereira, Paulo A. A.; Crispino, Maurizio – Rheological characteristics of EVA modified bitumen and their correlations with bitumen concrete properties , 2013

Novais, R. M.; Simon, Frank; Potschke, Petra; Villmow, Tobias; Covas, J. A.; Paiva, M. C. – Poly(lactic acid) composites with poly(lactic acid)-modified carbon nanotubes , 2013

Barbosa, Carlos N.; Simões, Ricardo; Franzen, Markus; Viana, J. C. – Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene , 2013

Delva, L.; Van De Keere, T.; Alves, Rui; Ragaert, K.; Gaspar-Cunha, A.; Cardon, L; Degrieck, J. – Extrusion and characterization of nanoclay filled polypropylene , 2013

Pettarin, Valeria; Viau, Gastón; Fasce, L.; Viana, J. C.; Pontes, A. J.; Frontini, P. M.; Pouzada, A. S. – Uni- and biaxial impact behavior of double-gated nanoclay-reinforced polypropylene injection moldings , 2013

Dencheva, Nadya Vasileva; Denchev, Z.; Stribeck, N.; Motovilin, M.; Zeinolebadi, Ahmad; Funari, S. S.; Botta, Stephan – Nanostructure transitions and their relation to mechanical properties in polyethylene/polyamide 6 microfibrillar composites as revealed by SAXS/straining studies , 2013

Lima, A. Delgado; Botelho, Gabriela; Silva, Maria Manuela; Machado, A. V. – Durability of PCL nanocomposites under different environments , 2013

Pettarin, Valeria; Brun, Florencia; Viana, J. C.; Pouzada, A. S.; Frontini, P. M. – Toughness distribution in complex PP/nanoclay injected mouldings , 2013

Hede, Shantesh; Nunes, Manuel L.; Ferreira, Paula Varandas; Rocha, Luís A. – Incorporating sustainability in decision-making for medical device development , 2013

Carneiro, O. S.; Nóbrega, J. M.; Mota, Armando R.; Silva, Carolina – Prototype and methodology for the characterization of the polymer-calibrator interface heat transfer coefficient , 2013

Oliveira, Manuel; Machado, A. V. – Microscopy as a powerful technique to characterise polymer matrix nanocomposites , 2013

Ferreira, Tânia; Paiva, M. C.; Pontes, A. J. – Dispersion of carbon nanotubes in polyamide 6 for microinjection moulding , 2013-10

Teixeira, P. F.; Hilliou, L.; Covas, J. A.; Maia, J. M. – Assessing the practical utility of the hole-pressure method for the in-line rheological characterization of polymer melts , 2013

Rodrigues, Alexandre; Nabankur, Deb; Hilliou, L.; Viana, J. C.; Bucknall, David G.; Bernardo, Gabriel – Low temperature solid state processing of pure P3HT fibers , 2013

Silva, M.; Gago, P. T.; Medeiros, L.; Bom, J.; Mateus, A.; Soares, R.; Pontes, A. J. – BigProto – fabrico avançado de protótipos técnicos de grandes dimensões , 2013-01

Dencheva, Nadya Vasileva; Denchev, Z. – Clay distribution and crystalline structure evolution in polyamide 6/montmorillonite composites prepared by activated Anionic polymerization , 2013-04-19

Machado, A. V.; Amorim, Sara; Botelho, Gabriela; Neves, Isabel C.; Fonseca, António Manuel – Nanocomposites of poly(ε-caprolactone) doped with titanium species , 2013

Lanoë, Thomas; Simões, Carla L.; Simões, Ricardo – Improving the environmental performance of bedding products by using life cycle assessment at the design stage , 2013

Costantino, Alejandra; Pettarin, Valeria; Viana, J. C.; Pontes, A. J.; Pouzada, A. S. – Polypropylene/clay nanocomposites produced by shear controlled orientation in injection moulding : deformation and fracture properties , 2013-11

Cunha, Maria Manuela Cruz; Miranda, Isabel; Lopes, Nuno; Simões, Ricardo João Ferreira – An e-marketplace of healthcare and social care services: the perceived interest , 2013

Hilbig, Travis; Brostow, Witold; Simões, Ricardo – Simulating scratch behavior of polymers with mesoscopic molecular dynamics , 2013

Pouzada, A. S. – Rediscovering structural foams in injection moulding , 2013-10

Rocha, Javier R.; Yang, Kevin Z.; Hilbig, Travis; Brostow, Witold; Simões, Ricardo – Polymer indentation with mesoscopic molecular dynamics , 2013

Santos, R. M.; Botelho, Gabriela; Machado, Ana – Influence of the testing conditions on the efficiency and durability of stabilizers against ABS photo-oxidation , 2013

Simões, Carla L.; Simões, Ricardo; Carvalho, J. M. Valério de; Pontes, A. J.; Bernardo, C. A. – The quest for a sustainable product : an environmental study of tyre recyclates , 2013

Vasco, Joel Oliveira Correia; Ferreira, Isabel S.; Pouzada, A. S. – Evaluation of the performance of micromoulding blocks using micromanufacturing technologies , 2013

Barbas, J. M.; Machado, A. V.; Covas, J. A. – Evolution of dispersion along the extruder during the manufacture of polymer-organoclay nanocomposites , 2013

Vardasca, Ricardo; Costa, Ângelo; Mendes, P. M.; Novais, Paulo; Simões, Ricardo – Information and technology implementation issues in AAL solutions , 2013

Vasco, Joel Oliveira Correia; Pouzada, A. S. – A study on microinjection moulding using moulding blocks by additive micromanufacturing , 2013

Bernardo, Gabriel – Diffusivity of alcohols in amorphous polystyrene , 2013

Brostow, Witold; Deshpande, Sameer; Hilbig, Travis; Simões, Ricardo – Molecular dynamics computer simulation of scratch resistance testing of polymers : visualization , 2013

Gonçalves, N. D.; Carneiro, O. S.; Nóbrega, J. M. – Design of complex profile extrusion dies through numerical modeling , 2013

Dencheva, Nadya Vasileva; Denchev, Z.; Pouzada, A. S.; Sampaio, Ana Sofia; Rocha, A. M. – Structure–properties relationship in single polymer composites based on polyamide 6 prepared by in-mold anionic polymerization , 2013

Oliveira, M.; Nogueira, R.; Machado, A. V. – Hybrid nanocomposite preparation in a batch mixer and a twin-screw extruder , 2013

Zhiltsova, T. V.; Oliveira, M. S. A.; Ferreira, J. A.; Vasco, Joel Oliveira Correia; Pouzada, A. S.; Pontes, A. J. – Polymer flow dynamics in microimpressions : an experimental approach , 2013-02

Todorov, Lyudmil V.; Martins, Carla I.; Viana, J. C. – In situ WAXS/SAXS structural evolution study during uniaxial stretching of poly(ethylene therephthalate) nanocomposites in solid state: Poly(ethylene therephthalate)/montmorillonite nanocomposites , 2013-06-05

Novo, P. J.; Nunes, J. P.; Silva, J. F.; Tinoco, V.; Marques, A. T. – Production of thermoplastics matrix preimpregnated materials to manufacture composite pultruded profiles , 2013

Nunes, J. P.; Silva, J. F.; Novo, Paulo – Processing thermoplastic matrix towpregs by pultrusion , 2013

Rodrigues, F. D.; Cunha, Mara; Hilliou, L.; Rino, L.; Correia, M. R.; Busani, T.; Bernardo, Gabriel; Wiggers, H.; Filonovich, Sergej; Pereira, Ricardo – Impact of composition and morphology on the optical properties of Si-NC/P3HT thin films processed from solution , 2013-05-17

Costantino, Alejandra; Pettarin, Valeria; Viana, J. C.; Pontes, A. J.; Pouzada, A. S.; Frontini, P. M. – Morphology-performance relationship of polypropylene-nanoclay composites processed by shear controlled injection moulding , 2013-06

Oliveira, M.; Machado, A. V. – Preparation and characterization of ethylene-vinyl acetate nanocomposites: enhanced flame retardant , 2013

Santos, R. M.; Botelho, Gabriela; Cramez, M. C.; Machado, Ana – Outdoor and accelerated weathering of acrylonitrile-butadiene-styrene : a correlation study , 2013

Simões, Carla L.; Pinto, Lígia; Bernardo, C. A. – Enviromental and economic assessment of road safety product made with virgin and recycled HDPE : a comparative study , 2013