2013

Esteves, F. R.; Pouzada, A. S.; Martins, Carla I. – Characterization of polypropylene structural foams for large part applications , 2013

Costa, Ângelo; Martinez-Martin, Ester; P. del Pobil, Angel; Simões, Ricardo; Novais, Paulo – Find it: an assistant home agent , 2013

Cunha, Mara; Bernardo, Gabriel; Hilliou, L.; Wiggers, H.; Pereira, Ricardo – Morphology control of thin P3HT-Si-NCs composite films for hybrid photovoltaic cells , 2013

Datta, Rituparna; Costa, M. Fernanda P.; Gaspar-Cunha, A.; Deb, Kalyanmoy – An evolutionary algorithm based pattern search approach for constrained optimization , 2013-06-20

Neves, A. F.; Salmoria, G. V.; Ahrens, C. H.; Pouzada, A. S.; Silva, M. A. – Assessment of injection moulded parts of PP/nanoclay produced with hybrid moulds , 2013

Carneiro, O. S.; Ferrás, Luís Jorge Lima; Pinho, Fernando T.; Nóbrega, J. M. – Effect of polymer melt wall slip on the flow balance of profile extrusion dies , 2013

Gonçalves, C.; Sousa, Joana; Silva, Cristina Nogueira; Simões, Ricardo – Improving fECG signal acquisition in the evaluation of fetal well-being , 2013

Leite, Janaina L.; Salmoria, Gean V.; Ahrens, Carlos H.; Pouzada, A. S. – Characterization of epoxy/steel fibres composites for hybrid injection moulds , 2013

Nunes, J. P.; Silva, J. F.; Novo, Paulo; Marques, A. T. – Processing conditions and properties of continuous fiber reinforced GF/PP thermoplastic matrix composites manufactured from different pre-impregnated materials , 2013-07-29

Ferreira, Alexandre; Ferreira, Fernando; Paiva, M. C. – Textile sensor applications with composite monofilaments of polymer / carbon nanotubes , 2013

Camboa, André; Ribeiro, Bernardo Sousa; Nunes, J. P.; Alves, Jorge Lino – A mechanical analysis of polydicyclopentadiene with metal inserts through flexural load , 2013-06-23

Gonçalves, N. D.; Ribau, A. M.; Carneiro, O. S.; Nóbrega, J. M. – Computer aided design of extrusion dies for complex geometry profiles , 2013

Gomes, Marta; Pontes, A. J.; Viana, J. C. – Influence of the local morphology on the surface tension of injection molded polypropylene , 2013

Costa, L.; Cramez, M. C.; Pontes, A. J. – A study on shrinkage and warpage of rotational moulded polyethylene , 2013

Nunes, J. P.; Oliveira, Luís; Silva, J. F.; Barros, B.; Amorim, Luís Manuel Machado; Vasconcelos, M. – Composite pressure vessels for commercial applications , 2013-07-29

Silva, C. S.; Pontes, A. J.; Viana, J. C.; Rocha, Luís A.; Gaspar, J. – A fully integrated three-axis thermal accelerometer , 2013-05

Simões, Ricardo; Viana, J. C.; Dias, Gustavo R.; Cunha, A. M. – Mechanical behavior of the lamellar structure in semi-crystalline polymers , 2013

Terroso, Miguel; Freitas, Ricardo; Gabriel, Joaquim; Marques, António Torres; Simões, Ricardo – Active assistance for senior healthcare: A wearable system for fall detection , 2013

Garcia, M. C. R.; Netto, A. C. S.; Pontes, A. J. – Assessment of the shrinkage and ejection forces of reinforced polypropylene based on nanoclays and short glass fibre , 2013

Costa, M.; Vasco, Joel Oliveira Correia; Pouzada, A. S.; Pontes, A. J. – Characterization of polymer behavior in microchannels , 2013

Lafranche, Eric; Martins, Carla I.; Oliveira, Vânia M.; Krawczak, Patricia – Prediction of tensile properties of injection moulding flax fibre reinforced polypropylene from morphology analysis , 2013-03

Vieira, D. G.; Meireles, José F.; Nunes, J. P. – Improving the dynamical behaviour of a laser cutting equipment by using a carbon fibre composite main structural runway frame , 2013

Gama, Oscar; Simões, Ricardo – A platform to emulate Ambient Assisted Living environments , 2013

Santos, Isabel O.; Pontes, A. J.; Martins, Carla I. – Morphological aspects of injection-molded polypropylene with metallic pigments , 2013

Oliveira, Mariana Braga; Machado, A. V. – Rheology as a tool to follow hybrid nanocomposites preparation , 2013

Teixeira, Pedro; Pontes, A. J.; Henriques, Elsa – Effect of the injection moulding processing conditions on biopolymers final properties , 2013

Silva, J. F.; Nunes, J. P.; Duro, A. C.; Castro, B. F. – Processing and properties of natural fibers reinforced thermoplastic and thermosseting composites , 2013-07-29

Correia, Alexandre; Valashani, S. Mohsen; Pires, Francisco; Simões, Ricardo – Modelling the mechanical behavior of polymer-based nanocomposites , 2013

Martins, Luís F.; Rocha, Luís A.; Pontes, A. J. – Piezoresistive accelerometer produced by microinjection moulding , 2013-07

Cyriac, Febin; Hilliou, L.; Covas, J. A.; Vittorias, Iakovos – Extrusion-instabilities from non-linear rheology for industrial polyethylene , 2013-09

Nunes, J. P.; Castro, B. F.; Duro, A. C.; Silva, J. F.; Oliveira, Luís – Development and assessment to environmentally friendly natural fiber composites , 2013-06-09

Santos, M. S.; Nunes, J. P.; Silva, J. F.; Novo, Paulo; Marques, A. T. – Comparing the performance of different thermoplastic matrix pre-impregnated materials , 2013-03-25

Azevedo, Gabriela; Bernardo, Gabriel; Hilliou, L. – Phase diagrams of kappa/iota-hybrid carrageenans : the role of chemical structure and type of salt , 2013

Azevedo, Gabriela; Bernardo, Gabriel; Hilliou, L. – Gelling mechanism in kappa/iota-hybrid carrageenans : chemical structure and salt effects , 2013-10

Hilliou, L.; Azevedo, Gabriela; Santos, Bernardo Domingues; Abreu, Helena; Pinto, Isabel Sousa; Feio, Gabriel – Does aquaculture of Mastocarpus stellatus in an IMTA impact on the chemical and rheological properties of extracted carrageenans , 2013

Cunha, Mara; Berthet, Marie-Alix; Covas, J. A.; Vicente, A. A.; Hilliou, L. – PHBV/Beer spent grain fibres composites for food packaging : processability and film properties , 2013

Tinoco, V.; Novo, Paulo; Nunes, J. P.; Silva, J. F.; Marques, A. T. – Production of thermoplastic matrix pre-impregnated materials to manufacture composite pultruded profiles , 2013-03-25

Teixeira, P. F.; Fernandes, Susete N.; Canejo, João; Godinho, Maria Helena; Leal, Catarina Rosa; Hilliou, L. – When liquid crystalline cellulose flows and relaxes , 2013-09

Oliveira, Manuel; Machado, A. V. – Rheology as a tool to follow chemical reactions , 2013

Cunha, Mara; Berthet, Marie-Alix; Pereira, Ricardo; Hilliou, L.; Covas, J. A.; Vicente, A. A. – Development of polyhydroxyalkanoate/ beer spent grain fibers composites for film blowing applications , 2013-10

Teixeira, P. F.; Hilliou, L.; Covas, J. A.; Maia, J. M. – In-line optical characterization during extrusion of polymer blends , 2013-09

Duro, A. C.; Castro, B. F.; Silva, J. F.; Nunes, J. P. – Processing and properties of composites obtained from natural fibres and thermosetting matrices , 2013-03-25

Rodrigues, A.; Pontes, A. J. – Medição de coeficientes de atrito em condições de extração em moldes de injeção , 2013-09

Santos, Isabel O.; Martins, Luis C.; Ferreira, Sandra C.; Martins, Carla I.; Pontes, A. J. – Processamento de embalagens rígidas de paredes finas em Poli (ácido láctico) , 2013-01

Martins, Carla I.; Santos, Isabel O.; Pontes, A. J. – Peças poliméricas com aspecto metálico , 2013-06

Baptista, António; Pontes, A. J. – Engineering & tooling na embalagem , 2013-06

Hilliou, L. – Development of polyhydroxyalkanoate composites based on food industry by-products for compostable packaging , 2013-07

Martins, Carla I.; Santos, Isabel O.; Pontes, A. J. – Peças poliméricas com aspeto metálico , 2013-06

Santos, Isabel O.; Martins, Luis C.; Ferreira, Sandra C.; Martins, Carla I.; Pontes, A. J. – Processamento de embalagens rígidas de paredes finas em poli(ácido láctico) , 2013-04

Pettarin, Valeria; Viau, Gastón; Fasce, L.; Viana, J. C.; Pontes, A. J.; Frontini, P. M.; Pouzada, A. S. – Uni- and biaxial impact behaviour of double-gated nanoclay-reinforced polypropylene injection mouldings , 2013