Guimarães, D. A.; Alves, A.; Pontes, A. J.
– The use of stereolithography in direct tooling
, 2007
Artigo
Hancic, A.; Kosel, F.; Campos, A. R.; Cunha, A. M.; Gantar, G.
– A model for predicting the mechanical properties of wood-plastic composites : a micro-mechanical approach
, 2007
Artigo
Viana, J. C.; Cunha, A. M.; Billon, N.
– Experimental characterization and computational simulations of the impact behavior of injection-molded polymers
, 2007
Artigo
Filipe, Susana A.; Maia, J. M.; Leal, Catarina Rosa; Cidade, Maria Teresa
– Influence of processing conditions on the morphological development and final mechanical properties of PP/LCP blends
, 2007
Artigo
Machado, A. V.; Moura, I.; Duarte, F. M.; Botelho, Gabriela; Nogueira, R.; Brito, A. G.
– Evaluation of properties and biodeterioration’s potential of polyethylene and aliphatic polyesters blends
, 2007
Artigo
Musampa, R. M.; Alves, M. M.; Maia, J. M.
– Phase separation, rheology and microstructure of pea protein-kappa-carrageenan mixtures
, 2007
Artigo
Neves, Isabel C.; Botelho, Gabriela; Machado, A. V.; Rebelo, P.; Ramoa, S.; Pereira, M. F. R.; Ramanathan, A.; Pescarmona, P.
– Feedstock recycling of polyethylene over A1TUD-1 mesoporous catalyst
, 2007-08
Artigo
Gonçalves, Mathias; Salmoria, Gean; Pouzada, A. S.
– Study of the tribological properties of moulds obtained by stereolithography
, 2007
Capítulos de Livros
Morelli, Carolina L.; Sousa, José Alexandrino; Pouzada, A. S.
– Assessment of weld line performance of polypropylene/talc mouldings produced in hot runner injection moulds
, 2007
Capítulos de Livros
Nóbrega, J. M.; Carneiro, O. S.
– Automatic design in profile extrusion: flow balance and cooling
, 2007
Capítulos de Livros
Martínez Gamba, Matias R.; Frontini, P. M.; Pouzada, A. S.
– Impact properties and microhardness of glass reinforced polypropylene
, 2007
Capítulos de Livros
Agassant, J. F.; Covas, J. A.
– An overview of polymer processing modelling
, 2007
Capítulos de Livros
De Micco, S.; Frontini, P. M.; Viana, J. C.
– Fracture behaviour of injection moulded polypropylene : the effect of processing conditions
, 2007
Capítulos de Livros
Ferreira, José C.; Fonseca, Carlos M.; Gaspar-Cunha, A.
– Selection of solutions in a multi-objective environment: polymer extrusion a case study
, 2007
Capítulos de Livros
Vaz, Cláudia M.; Cunha, A. M.
– Soy-based materials for drug-release applications
, 2007
Capítulos de Livros
Fernandes, Carla S.; Nóbrega, J. M.; Maia, J. M.; Dias, Ricardo P.
– CFD simulation of stirred yoghurt processing in plate heat exchangers
, 2007
Capítulos de Livros
Sencadas, Vítor João Gomes Silva; Lanceros-Méndez, S.; Gregório Júnior, R.; Pouzada, A. S.
– Influence of the processing conditions on the morphology and crystalline phases of PVDF
, 2007
Capítulos de Livros
Denchev, Z.
– Biodegradation studies on polymer blends and composites comprising biopolymer
, 2007
Capítulos de Livros
Osório, Sandra Milena Luna
– Novel polymeric systems based on natural materials : development and biological performance
, 2007-04-05
Teses de Mestrado
Pereira, João Carlos Velosa
– Reservatórios em material compósito para fluídos sob pressão
, 2007-07-24
van Duin, Martin; Antunes, Carla; Machado, A. V.; L'Abee, Roy; Goossens, Han
– Morphology development of (sub)micrometer thermoplastic vulcanisates
, 2007-12
Livro de atas - Texto completo
Gomes, A. A.; Morim, P. C.; Oliveira, P. M.; Marques, C. M.; Minas, Graça; Pontes, A. J.
– A microfluidic system for integration on lab-on-a-chip devices
, 2007-09
Livro de atas - Texto completo
Moura, I.; Machado, A. V.; Duarte, F. M.; Botelho, Gabriela; Nogueira, R.
– Preparation of biodegradable materials by reactive extruction
, 2007-04-01
Livro de atas - Resumo
2006
Kumar, S. Ananda; Denchev, Z.; Alagar, M.
– Synthesis and thermal characterization of phosphorus- containing siliconized epoxy resins
, 2006
Artigo
Fernandes, C. S.; Dias, Ricardo P.; Nóbrega, J. M.; Afonso, I. M.; Melo, L. F.; Maia, J. M.
– Thermal behaviour of stirred yoghurt during cooling in plate heat exchangers
, 2006
Artigo
Oliveira, M. J.; Brito, A. M.; Costa, M. F.; Costa, M. C.
– Gloss and surface topography of ABS: a study on the Influence of the injection molding parameters
, 2006
Artigo
Duarte, F. M.; Botelho, Gabriela; Machado, A. V.
– Photo-degradability of ketone modified PS/HIPS blends
, 2006-02
Artigo
Silva, Cristina A.; Viana, J. C.; Hattum, F. W. J. van; Cunha, A. M.
– Fiber orientation in divergent/convergent fows in expansion and compression injection molding
, 2006
Artigo
Leer, C.; Hattum, F. W. J. van; Gaspar-Cunha, A.; Carneiro, O. S.; Bernardo, C. A.
– Tailored-shear extrusion carbon nanofibre/polyamide composites and its effect on the electrical percolation threshold
, 2006-09
Artigo
Filipe, Susana A.; Cidade, Maria Teresa; Wilhelm, M.; Leal, Catarina Rosa; Maia, J. M.
– Evolution of the morphological and rheological properties along the extruder length for compatibilized blends of a commercial liquid-crystalline polymer and polypropylene
, 2006
Artigo
Martins, Carla I.; Cakmak, M.
– Role of relaxation on strain crystallization of uniaxially stretched poly(ethylene naphthalate) films : a mechanooptical study
, 2006
Artigo
Alves, N. M.; Bártolo, Paulo Jorge
– Integrated computational tools for virtual and physical automatic construction
, 2006
Artigo
Simões, Ricardo; Cunha, A. M.; Brostow, Witold
– Computer simulations of true stress development and viscoelastic behavior in amorphous polymeric materials
, 2006
Artigo
Ben Abdallah, F.; Ben Cheikh, R.; Baklouti, M.; Denchev, Z.; Cunha, A. M.
– Characterization of composite materials based on PP-Cork blends
, 2006
Artigo
Viana, J. C.
– The local thermomechanical conditions and the fracture behaviour of an injection moulded poly(Oxymethylene)
, 2006
Artigo
Machado, A. V.; Neves, Isabel C.; Botelho, Gabriela; Rebelo, P.
– The effect of acidity behaviour of Y zeolites on the catalytic degradation of polyethylene
, 2006
Artigo
Machado, A. V.; Fernandes, Ana C.; Carvalho, P.; Vaz, F.; Lanceros-Méndez, S.; Parreira, N. M. G.; Pierson, J. F.; Martin, N.
– Property change in multifunctional TiCxOy thin films : effect of the O/Ti ratio
, 2006
Artigo
Bártolo, Paulo Jorge
– Photo-curing modelling : direct irradiation
, 2006
Artigo
Viana, J. C.
– Polymeric materials for impact and energy dissipation
, 2006
Artigo
Carneiro, O. S.; Viana, J. C.; Nóbrega, J. M.
– Study on processing-microstructure-properties relationships of extruded profiles
, 2006
Artigo
Simões, Ricardo João Ferreira; Cunha, A. M.; Brostow, Witold
– Molecular dynamics simulations of polymer viscoelasticity: effect of the loading conditions and creep behavior
, 2006
Artigo
Hattum, F. W. J. van; Leer, C.; Viana, J. C.; Carneiro, O. S.; Lake, M. L.; Bernardo, C. A.
– Conductive long fibre reinforced thermoplastics by using carbon nanofibres
, 2006
Artigo
Balakrishnan, T.; Alagar, M.; Denchev, Z.; Kumar, S. Ananda
– Development and characterization of silicone/phosphorus modified epoxy materials and their application as anticorrosion and antifouling coatings
, 2006
Artigo
Ribeiro, C. J.; Viana, J. C.; Vilaça, F.; Azenha, J.
– Design and simulation of automotive plastic pillars for occupant protection
, 2006-09
Artigo
Pick, L. T.; Harkin-Jones, Eileen; Oliveira, M. J.; Cramez, M. C.
– The effect of cooling rate on the impact and dynamic mechanical properties of rotationally moulded metallocene catalysed linear low density polyethylene
, 2006
Artigo
Pouzada, A. S.; Ferreira, Eduardo Campos; Pontes, A. J.
– Friction properties of moulding thermoplastics
, 2006
Artigo
Machado, A. V.; Yquel, Virginie; Covas, J. A.; Flat, Jean.-Jacques; Ghamri, Nessim; Wollny, Andreas
– The effect of the compatibilization route of PA/PO blends on the physico-chemical phenomena developing along a twin-screw extruder
, 2006
Artigo
Martins, Manuel Rodrigues; Covas, J. A.
– Helical flow during rotational pipe extrusion,
, 2006
Artigo
Berzini, F.; Vergnes, B.; Canevarolo, S. V.; Machado, A. V.; Covas, J. A.
– Evolution of the peroxide-induced degradation of polypropylene along a twin-screw extruder : experimental data and theoretical predictions
, 2006