2015

Gusmão, Rui; López-Puente, Vanesa; Pastoriza-Santos, Isabel; Pérez-Juste, Jorge; Proença, M. Fernanda R. P.; Bento, M. Fátima; Geraldo, M. Dulce; Paiva, M. C.; González-Romero, Elisa – Enhanced electrochemical sensing of polyphenols by oxygen-mediated surface , 2015

Costantino, M. A.; Pettarin, V.; Pontes, A. J.; Frontini, P. M. – Mechanical performance of double gated injected metallic looking polypropylene parts , 2015-11

Azevedo, G.; Torres, M. D.; Sousa-Pinto, I.; Hilliou, L. – Effect of pre-extraction alkali treatment on the chemical structure and gelling properties of extracted hybrid carrageenan from Chondrus crispus and Ahnfeltiopsis devoniensis , 2015

Abreu, Ana S.; Oliveira, M.; Rodrigues, Rui M.; Cerqueira, M. A.; Vicente, A. A.; Machado, A. V.; Sá, Arsénio Vasconcelos – Antimicrobial nanostructured starch based films for packaging , 2015-09-20

Carneiro, O. S.; Ferreira da Silva, Alexandre; Gomes, Rui – Fused deposition modeling with polypropylene , 2015

Ferreira, A. V.; Volkov, Vadim; Abreu, Ana S.; Azóia, Nuno G.; Botelho, C. M.; Paulo, Artur Cavaco – Orange IV stabilizes silk fibroin microemulsions , 2015-05

Gusmão, Rui; Melle-Franco, M.; Geraldo, M. Dulce; Bento, M. Fátima; Paiva, M. C.; Proença, M. Fernanda R. P. – Probing the surface of oxidized carbon nanotubes by selective interaction with target molecules , 2015

Gonçalves, N. D.; Pereira, S. P.; Ferrás, Luís Jorge Lima; Nóbrega, J. M.; Carneiro, O. S. – Using the GPU to design complex profile extrusion dies , 2015

Loureiro, Nuno Calçada; Ghosh, Satyabrata; Viana, J. C.; Esteves, José Luis – Thermal characterization of polyhydroxyalkanoates and poly(lactic acid) blends obtained by injection molding , 2015

Ferreira, J. C. C.; Monteiro, T. S.; Lopes, A. C.; Costa, C. M.; Silva, Maria Manuela; Machado, A. V.; Lanceros-Méndez, S. – Variation of the physicochemical and morphological characteristics of solvent casted poly(vinylidene fluoride) along its binary phase diagram with dimethylformamide , 2015

Sousa, R. E.; Ferreira, J. C. C.; Costa, C. M.; Machado, A. V.; Silva, Maria Manuela; Lanceros-Méndez, S. – Tailoring poly(vinylidene fluoride-co-chlorotrifluoroethylene) microstructure and physicochemical properties by exploring its binary phase diagram with dimethylformamide , 2015

Parveen, Shama; Rana, Sohel; Fangueiro, Raúl; Paiva, M. C. – Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique , 2015

Costa, S. F.; Duarte, F. M.; Covas, J. A. – Thermal conditions affecting heat transfer in FDM/FFE: a contribution towards the numerical modelling of the process , 2015

Teixeira, Paulo Francisco; Maia, João Manuel Luís Lopes; Covas, J. A.; Hilliou, L. – A small-scale experimental extrusion set-up for exploring relationships between process-induced structures and characteristics of multiphase polymer systems , 2015

Berthet, Marie-Alix; Angellier-Coussy, Hélène; Machado, Diogo; Hilliou, L.; Staebler, Andreas; Vicente, A. A.; Gontard, Nathalie – Exploring the potentialities of using lignocellulosic fibres derived from three food by-products as constituents of biocomposites for food packaging , 2015

Azevedo, Gabriela; Domingues, Bernardo; Abreu, Helena; Pinto, Isabel Sousa; Feio, Gabriel; Hilliou, L. – Impact of cultivation of Mastocarpus stellatus in IMTA on the seaweeds chemistry and hybrid carrageenan properties , 2015

Barbosa, Carlos N.; Carvalho, Francisco; Viana, J. C.; Franzen, Markus; Simoes, Ricardo – Impact performance prediction of injection-molded talc-filled polypropylene through thermomechanical environment assessment , 2015

Gonçalves, Idalina; Botelho, C. M.; Teixeira, Ana; Abreu, Ana S.; Hilliou, L.; Carla Manuela Pereira Marinho da; Paulo, Artur Cavaco – Antimicrobial lubricant formulations containing poly(hydroxybenzene)-trimethoprim conjugates synthesized by tyrosinase , 2015-05

Costa, P.; Ribeiro, S.; Botelho, Gabriela; Machado, A. V.; Lanceros-Méndez, S. – Effect of butadiene/styrene ratio, block structure and carbon nanotube content on the mechanical and electrical properties of thermoplastic elastomers after UV ageing , 2015

Abreu, Ana S.; Oliveira, M.; Machado, A. V. – Effect of clay mineral addition on properties of bio-based polymer blends , 2015

Gama, Óscar Sílvio Marques Almeida; Simões, Ricardo João Ferreira – A hybrid MAC Scheme to improve the transmission performance in body sensor networks , 2015

Sabet, Seyyed M. M.; Clark, Joel; Nóbrega, J. M. – A cost study of common surface finish systems for steel structures , 2015

Castro, H. F.; Sowade, E.; Rocha, J. G.; Alpuim, P.; Machado, A. V.; Baumann, R. R.; Lanceros-Méndez, S. – Degradation of all-inkjet-printed organic thin-film transistors with TIPS-pentacene under processes applied in textile manufacturing , 2015

Loureiro, N. C.; Esteves, J. L.; Viana, J. C.; Ghosh, Satyabrata – Mechanical characterization of polyhydroxyalkanoate and poly(lactic acid) blends , 2015-02-01

Lafranche, Eric; Oliveira, Vania M.; Martins, Carla I.; Krawczak, Patricia – Prediction of injection-moulded flax fibre reinforced polypropylene tensile properties through a micro-morphology analysis , 2015

Costa, Ângelo; Teixeira, Juliana Manuela Figueiredo Freitas; Santos, Nuno A.; Vardasca, Ricardo; Fernandes, José Eduardo; Machado, Ricardo J.; Novais, Paulo; Simões, Ricardo – Promoting independent living and recreation in life through ambient assisted living technology , 2015

Santos, Nuno A.; Teixeira, Juliana Manuela Figueiredo Freitas; Pereira, António José Alves Pinto; Ferreira, Nuno Alexandre Castro; Lima, Ana Luísa Delgado; Simões, Ricardo; Machado, Ricardo J. – A demonstration case on the derivation of process-level logical architectures for ambient assisted living ecosystems , 2015

Machado, A. V.; Araújo, Andreia Isabel Silva; Oliveira, Manuel – Assessment of polymer-based nanocomposites biodegradability , 2015

Ferreira, Daniela Sofia Dias – Molecularly designed self-assembling matrices for applications in regenerative medicine , 2015-02-26

Torres, Ana B. Faia – Biochemical and physical surface functionalization of polycaprolactone as a key mediator of osteogenic differentiation and vascularized tissue morphogenesis , 2015-07-23

Matveeva, Anna – Structure-property relationships in polymer nanocomposites , 2015-05-08

Pereira, José Rui Ribeiro da Cruz – Insights into the role of biochemical factors and extracellular matrix environment during chondrocyte culture: relevance on articular cartilage repair strategies , 2015-03-11

Mihaila, Silvia Maria – Routes to advance vascularized bone tissue engineering constructs , 2015-02-12

Sabet, Seyyed Mohammad Mohsen – Designing next generation car washing machines with rotary brushes , 2015-09-17

Macedo, Maria João Mano Fernandes – Produção de bioplásticos a partir de agro-resíduos , 2015

Fernandes, Bruna Marisa Raimundo – Preparação de suspensões aquosas de nanopartículas de carbono para deposição em superfícies , 2015

Ferreira, Pedro Miguel Gonçalves – A study of mechanical properties of multilayer polymer sheets containing a recycled layer , 2015

Moura, Duarte Alexandre Campos Serra – Free-standing multilayered membranes based on graphene and natural polymers for biomedical applications , 2015

Fernandes, Tiago Fernando Morais – Análise viscoelástica em projeto com polímeros termoplásticos , 2015-12-14

Khaliq, Muhammad Hussam – Key features of materials for the fused deposition modelling process , 2015

Dias, Sandra Marina Ferreira – Compósitos de PVC com resíduos de café , 2015

Costa, Ana Cristina Jesus – Study of stability of multilayers films based on natural polymers , 2015

Vieira, Abílio José Araújo – Pultrusão de perfis para aplicações avançadas a partir de towpregs de elevado desempenho , 2015

Ferreira, João Manuel Duarte – Modelling the polymeric profile extrusion cooling stage with OpenFOAM® , 2015

Oliveira, Bruno André Martins – Investigação e desenvolvimento de cabos em material polimérico para acionamento de autoclismos , 2015

Lopes, Leandro Rodrigues – Impressão FDM de pares de materiais funcionais , 2015

Silva, Célia Maria Gomes Pereira da – Revestimentos têxteis com poliuretano hot-melt para uso hospitalar , 2015-12-16

Freitas, Verónica Catarina Silva de – Nanocompósitos polibutileno tereftalato - nanotubos de carbono: influência das condições de processamento na dispersão e propriedades , 2015

Silva, Joana Luísa Padrão Cruz Costa e – Desenvolvimento de membranas de acetato de celulose contendo nanopartículas de prata-alumínio , 2015

Bastos, Lourenço Manuel Ferreira – Modelação constitutiva de materiais carregados com fibras , 2015