Teixeira, P. F.; Thepthong, S.; Hilliou, L.; Covas, J. A.; Maia, J. M.
– In-line rheo-optical characterization in gram scale extrusion of materials
, 2011-02
Livro de atas - Resumo
Vilas Boas, H. M.; Duarte, F. M.; Paiva, M. C.
– Electrical and thermal properties of polyurethane/carbon nanotubes composites
, 2011
Livro de atas - Resumo
Águas, H.; Bernacka-Wojcik, I.; Busani, T.; Fortunato, E.; Martins, R.; Lopes, P.; Simões, P.; Ferreira, M.; Hilliou, L.
– Microplat project : development status
, 2011-02-11
Livro de atas - Resumo
Duarte, L.; Machado, A. V.; Vaz, F.; Fonseca, C.; Nóbrega, J. M.
– Development of novel conformable electrode for surface bio-potential measurement
, 2011
Livro de atas - Resumo
Oliveira, M.; Nogueira, R.; Machado, A. V.
– “In-situ” generation of aluminum nanoparticles in a PP matrix
, 2011-05-18
Livro de atas - Resumo
Mould, Sacha Trevelyan; Fermeglia, M.; Covas, J. A.; Nóbrega, J. M.
– A multiscale modelling approach to simulate complex fluids flows : from atomistic towards continuum scales
, 2011
Livro de atas - Resumo
Novais, R. M.; Paiva, M. C.; Covas, J. A.
– Dispersion of carbon nanotubes in poly(lactic acid)
, 2011
Livro de atas - Resumo
Silva, C. S.; Cerqueira, M. F.; Ribeiro, J. F.; Gonçalves, L. M.; Pontes, A. J.; Viana, J. C.; Rocha, Luís A.
– Design of a polymer 3D-thermal accelerometer
, 2011-06-19
Livro de atas - Resumo
Marques, P.; Hilliou, L.; Covas, J. A.; Maia, J. M.
– Microfluidic behavior of model and complex fluids
, 2011-02
Livro de atas - Resumo
Gonçalves, N. D.; Nóbrega, J. M.; Carneiro, O. S.
– Computer aided design of extrusion dies for complex geometry profiles
, 2011
Livro de atas - Resumo
Santos, R. M.; Cramez, M. C.; Botelho, Gabriela; Machado, A. V.
– Effect of weathering conditions on the degradation behaviour of ABS
, 2011
Livro de atas - Resumo
Moura, I.; Machado, A. V.; Nogueira, R.; Legare, Véronique Bounor
– Influence of EVA molar mass on preparation of EVA-g-PCL biobased copolymers
, 2011
Livro de atas - Resumo
Mould, Sacha Trevelyan; Barbas, J. M.; Pereira, S. P.; Machado, A. V.; Nóbrega, J. M.; Covas, J. A.
– On-line rheometry to monitor nanocomposites production
, 2011-02
Livro de atas - Resumo
Vieira, D. G.; Meireles, José F.; Nunes, J. P.
– Improving the dynamical behaviour of a laser cutting equipment by using a carbon fibre composite main structural runway frame
, 2011-04
Livro de atas - Resumo
Sepúlveda, A. T.; Pontes, A. J.; Viana, J. C.; Rocha, Luís A.
– Aligned carbon nanotubes composites for flexible pressure sensors
, 2011-04-18
Livro de atas - Resumo
Paiva, M. C.; Oliveira, Bruno; Covas, J. A.
– Estimating the sustainability of carbon nanotube composites: reprocessing studies
, 2011
Livro de atas - Resumo
Barbas, J. M.; Machado, A. V.; Covas, J. A.
– Near-infrared spectroscopy for on-line monitoring of nanoclay dispersion in polymer nanocomposites
, 2011
Livro de atas - Resumo
Martins, L. F.; Pontes, A. J.
– Melhoria da previsão de fluxo em moldação por injecção : efeito da pressão na viscosidade [Improving the flow simulation in injection moulding : the effect of pressure on viscosity]
, 2011-07
Outro
Pontes, A. J.; Viana, J. C.
– Integração de tecnologia, materiais e produtos
, 2011-10
Outro
Gonçalves, N. D.; Ribau, A. M.; Carneiro, O. S.; Nóbrega, J. M.
– Computer aided design of extrusion forming tools complex geometry profiles
, 2011-02
Poster em conferência
Nóbrega, J. M.; Carneiro, O. S.
– Projecto assistido por computador no apoio à concepção de ferramentas de extrusão
, 2011-10
Comunicação oral
Frontini, P. M.; Pouzada, A. S.
– Is there any chance for polypropylene/clay nanocomposites in injection molding?
, 2011-08
Editorial em revista
Paiva, M. C.
– Graphene nanoribbons from carbon nanotubes
, 2011-10-21
Palestra
Nunes, J. P.; Silva, J. F.; Novo, Paulo
– Processing thermoplastic matrix towpregs by pultrusion
, 2011
Preprint
2010
Simões, Ricardo; Silva, Jaime; Vaia, Richard
– A complex network based simulation approach to predict the electrical properties of nanocomposites
, 2010
Artigo
Viana, J. C.; Simões, Ricardo; Mano, J. F.; Oliveira, M. J.; Denchev, Z.; Brostow, Witold; Cunha, A. M.
– Thermomechanical processing environment and morphology development of a thermotropic polymer liquid crystal
, 2010
Artigo
Leite, Janaina L.; Rasteiro, M. G.; Salmoria, Gean; Ahrens, Carlos; Pouzada, A. S.
– Epoxy-steel fiber composites : a simple model to predict the fiber sedimentation
, 2010
Artigo
Bernardo, Gabriel; Vesely, Drahosh
– Equilibrium swelling of polystyrene by alkanes and carboxylic acids : a simple quantitative correlation model
, 2010
Artigo
González, Daniel; Campos, A. R.; Cunha, A. M.; Santos, Valentin; Parajó, Juan Carlos
– Utilization of fibers obtained by peroxyformic acid processing of broom as reinforcing agents for biocomposites
, 2010-11
Artigo
Yamato, Masayuki; Leer, C.; Hattum, F. W. J. van; Carneiro, O. S.; Maia, J. M.
– Direct fibre simulation of carbon nanofibres suspensions in a newtonian fluid under simple shear
, 2010
Artigo
Fernandes, Célio Bruno Pinto; Pontes, A. J.; Viana, J. C.; Gaspar-Cunha, A.
– Using multiobjective evolutionary algorithms in the optimization of operating conditions of polymer injection molding
, 2010
Artigo
Ben Abdallah, F.; Ben Cheikh, R.; Baklouti, M.; Denchev, Z.; Cunha, A. M.
– Effect of surface treatment in cork reinforced composites
, 2010-09
Artigo
Bessa, Paulo C.; Machado, Raul; Nürnberger, Sylvia; Dopler, Daniela; Banerjee, Asmita; Cunha, A. M.; Rodríguez-Cabello, José Carlos; Redl, Heinz; Griensven, Martijn van; Reis, R. L.; Casal, Margarida
– Thermoresponsive self-assembled elastin-based nanoparticles for delivery of BMPs
, 2010-03
Artigo
Peralta, Elvira Joana Ferreira; Hilliou, L.; Silva, Manuel Ribeiro Dias da; Machado, A. V.; Pais, Jorge C.; Oilveira, Joel
– Rheological quantification of bitumen aging : definition of a new sensitive parameter
, 2010
Artigo
Simões, Ricardo João Ferreira; Silva, Jaime; Vaia, Richard; Cadilhe, A. M.
– Applications of the graph theory to the prediction of electrical and dielectric properties of nano-filled polymers
, 2010
Artigo
Leite, Janaina L.; Salmoria, Gean; Paggi, R. A.; Ahrens, Carlos; Pouzada, A. S.
– A study on morphological properties of laser sintered functionally graded blends of amorphous thermoplastics
, 2010
Artigo
Pontes, A. J.; Queiros, Miguel P.; Martinho, P. G.; Bártolo, Paulo Jorge; Pouzada, A. S.
– Experimental assessment of hybrid mould performance
, 2010-09
Artigo
Silva, M. P.; Sencadas, Vítor João Gomes Silva; Botelho, Gabriela; Machado, A. V.; Rolo, Anabela G.; Rocha, J. G.; Lanceros-Méndez, S.
– α- and γ-PVDF: Crystallization kinetics, microstructural variations and thermal behaviour
, 2010-07
Artigo
Villanueva, R. D.; Sousa, A. M. M.; Gonçalves, M. P.; Nilsson, M.; Hilliou, L.
– Production and properties of agar from the invasive marine alga, Gracilia Vermiculophylla (Gracilariales, Rhodophyta)
, 2010-04
Artigo
Silva, Jorge M.; Machado, A. V.; Moldenaers, Paula; Maia, J. M.
– The role of interfacial elasticity on the rheological behavior of polymer blends
, 2010
Artigo
Cardoso, Paulo; Silva, J.; Paleo, A. J.; Hattum, F. W. J. van; Simões, Ricardo; Lanceros-Méndez, S.
– The dominant role of tunneling in the conductivity of carbon nanofiber-epoxy composites
, 2010
Artigo
Silva, P. E. S.; Abreu, F. Vistulo; Simões, Ricardo; Dias, R. G.
– A first approach to filament dynamics
, 2010-11
Artigo
Pedrosa, P.; Chappé, J. M.; Fonseca, C.; Machado, A. V.; Nóbrega, J. M.; Vaz, F.
– Plasma surface modification of polycarbonate and polypropylene substrates for biomedical electrodes
, 2010-06
Artigo
Lopes, P. E.; Hattum, F. W. J. van; Pereira, C. M. C.; Nóvoa, P. J. R. O.; Ferreo, S.; Hepp, F.; Pambaguian, L.
– High CNT content composites with CNT bucky paper and epoxy resin matrix : impregnation behaviour, composite production and characterization
, 2010
Artigo
Mathew, M. T.; Novo, J.; Rocha, L. A.; Covas, J. A.; Gomes, J. R.
– Tribological, rheological and mechanical characterization of polymer blends for ropes and nets
, 2010
Artigo
Dencheva, Nadya Vasileva; Denchev, Z.; Oliveira, M. Jovita; Funari, Sergio S.
– Microstructure studies of In situ composites based on polyethylene/polyamide 12 blends
, 2010
Artigo
Peralta, Elvira Joana Ferreira; Silva, Hugo Manuel Ribeiro Dias da; Machado, A. V.; Pais, Jorge C.; Pereira, Paulo A. A.; Sousa, Jorge B.
– Changes in rubber due to its interaction with bitumen when producing asphalt rubber
, 2010
Artigo
Paleo, A. J.; Hattum, F. W. J. van; Pereira, J.; Rocha, J. G.; Silva, J.; Sencadas, Vítor João Gomes Silva; Lanceros-Méndez, S.
– Piezoresistive effect in polypropylene-carbon nanofiber composites obtained by shear extrusion
, 2010-06
Artigo
Domingues, N.; Gaspar-Cunha, A.; Covas, J. A.; Camesasca, M.; Kawasse, F. M.; Manas-Zloczower, I.
– Dynamics of filler size and spatial distribution in a plasticating single screw extruder : modeling and experimental observations
, 2010
Artigo
Paiva, M. C.; Novais, R. M.; Araújo, R. F.; Pederson, K. K.; Proença, M. Fernanda R. P.; Silva, Carlos J. R.; Costa, Carlos M.; Lanceros-Méndez, S.
– Organic functionalization of carbon nanofibres for composite applications
, 2010