2010

Paiva, M. C.; Simon, Frank; Novais, R. M.; Ferreira, Tânia; Proença, M. Fernanda R. P.; Wei Xu; Besenbacher, F. – Controlled functionalization of carbon nanotubes by a solvent-free multicomponent approach , 2010

Afonso, José A.; Macedo, Pedro; Silva, Hélder D.; Correia, J. H.; Rocha, L. A. – Design and implementation of multi-user wireless body sensor networks , 2010

Yamato, Masayuki; Maia, J. M. – Analysis of rheological properties of fibre suspensions in a Newtonian fluid by direct fibre simulation. part1: rigid fibre suspensions , 2010

Silva, Jorge M.; Machado, A. V.; Moldenaers, Paula; Maia, J. M. – The effect of interfacial properties on the deformation and relaxation behavior of PMMA/PS blends , 2010

Correlo, V. M.; Costa-Pinto, A. R.; Sol, P.; Covas, J. A.; Bhattacharya, Mrinal; Neves, N. M.; Reis, R. L. – Melt processing of chitosan-based fibers and fiber-mesh scaffolds for the engineering of connective tissues , 2010-12

Dencheva, Nadya Vasileva; Denchev, Z.; Oliveira, M. J.; Carneiro, O. S.; Pouzada, A. S. – Preparation, structural development, and mechanical properties of microfibrillar composite materials based on polyethylene/polyamide 6 oriented blends , 2010-03

Paiva, M. C.; Xu, Wei; Proença, M. Fernanda R. P.; Novais, R. M.; Laegsgaard, E.; Besenbacher, F. – Unzipping of functionalized multiwall carbon nanotubes Induced by STM , 2010-04-19

Sanchez-Garcia, M. D.; Hilliou, L.; Lagaron, J. M. – Nanobiocomposites of carrageenan, zein, and mica of interest in food packaging and coating applications , 2010-05

Custódio, F. J. M. F.; Anderson, P. D.; Peters, G. W. M.; Cunha, A. M.; Meijer, H. E. H. – Residual stresses in gas-assisted injection molding. , 2010

Dobrzánski, L. A.; Bilewicz, M.; Viana, J. C. – Mechanical approach of PP/MMT polymer nanocomposite , 2010

Denchev, Z.; Dencheva, Nadya Vasileva; Funari, S. S.; Motovilin, M.; Schubert, Tom; Stribeck, N. – Nanostructure and mechanical properties studied during dynamical straining of microfibrillar reinforced HDPE/PA blends , 2010-02

Santos, R. M.; Botelho, Gabriela; Machado, A. V. – Artificial and natural weathering of ABS , 2010-05

Bernardo, Gabriel; Vesely, Drahosh – Anomalous swelling of a polystyrene matrix in organic solvents , 2010

Silva, J. F.; Nunes, J. P.; Velosa, J. C.; Bernardo, C. A.; Marques, A. T. – Thermoplastic matrix towpreg production , 2010

Domingues, N.; Camesasca, M.; Kaufman, M.; Manas-Zloczower, I.; Gaspar-Cunha, A.; Covas, J. A. – Modeling of agglomerate dispersion in single screw extruders , 2010

Sanchez-Garcia, M. D.; Hilliou, L.; Lagaron, J. M. – Morphology and water barrier properties of nanobiocomposites of k/i-hybrid carrageenan and cellulose nanowhiskers , 2010

Machado, H. B.; Correia, R. N.; Covas, J. A. – Synthesis, extrusion and rheological behaviour of PU/HA composites for biomedical applications , 2010

Araújo, M. Alberta; Cunha, A. M.; Mota, M. – Changes on surface morphology of corn starch blend films , 2010-09

Gaspar-Cunha, A.; Covas, J. A.; Domingues, N. – Estimation of the morphology development of immiscible liquid-liquid systems during single screw extrusion , 2010

Cunha, Maria Manuela Cruz; Tavares, António J.; Simões, Ricardo – Handbook of research on developments in e-health and telemedicine: technological and social perspectives , 2010

Silva, Arlindo; Simões, Ricardo – Handbook of research on trends in product design and development: technological and organizational perspectives , 2010

Afonso, José A.; Macedo, Pedro; Rocha, Luís A.; Correia, J. H. – Hierarchical wireless networks of body sensor networks for healthcare applications , 2010

Almeida, Maria de Fátima; Machado, A. V.; Covas, J. A. – Using TEM and SEM to unveil the role of nanoclays in polymer blends , 2010

Fontes, Dalila B. M. M.; Gaspar-Cunha, A. – On multi-objective evolutionary algorithms , 2010

Maia, J. M.; Covas, J. A.; Cindio, Bruno de; Grabriele, Domenico – Rheology in materials engineering , 2010

Martins, Albino – Development of electrospun nanofibrous-based scaffolds for bone regeneration , 2010-05-03

Vasco, Joel Oliveira Correia – A study on the performance of microinjection moulds obtained using additive manufacturing , 2010-12-23

Barroso, Eva Guiomar Gonçalves – Study and optimisation of PVC coated fabrics for digital printing applications , 2010-02-01

Santos, T. C. – In vivo assessment of the host reactions to natural origin biomaterials aimed to be used as wound dressers and as bone tissue engineering scaffolds , 2010-01-11

Neves, Sara Carvalheira – Chitosan/Poly(ε-caprolactone) blend scaffolds for cartilage repair , 2010-07

Sampaio, M.; Simões, R.; Pontes, A. J. – Product design and development of novel technology-based products , 2010

Lundahl, A.; Fangueiro, Raúl; Soutinho, Hélder Filipe Cunha; Duarte, F. M. – Waste fibre reinforced ecocomposites , 2010

Vasco, Joel Oliveira Correia; Selada, Antonio; Neves, T.; Pouzada, A. S. – A study on the mouldability of POM microdetails in moulding blocks using micromanufacturing technologies , 2010-09

Moura, I.; Machado, A. V.; Nogueira, R.; Legare, Véronique Bounor – Synthesis of biodegradable copolymers based on ethylene vinyl acetate and polylactic acid , 2010

Gaspar-Cunha, A.; Mendes, F.; Duarte, J.; Vieira, Armando; Ribeiro, Bernardete; Ribeiro, André M. S.; Neves, João Carvalho – Multi-objective evolutionary algorithms for feature selection : application in bankruptcy prediction , 2010

Pettarin, Valeria; Fasce, L.; Frontini, P. M.; Correia, M. S.; Pontes, A. J.; Viana, J. C.; Pouzada, A. S. – Surface property effects of compounding a nanoclay masterbatch in PP injection moulding , 2010-09

Braga, I.; Abreu, Maria José Araújo Marques; Duarte, F. M. – Simulating human physiological response with a thermal manikin testing different non active medical devices , 2010

Dias, R. A.; Cretu, E.; Wolffenbuttel, R. F.; Rocha, Luís A. – Characterization of a pull-In based μg resolution accelerometer , 2010

Sampaio, A. M.; Terroso, Miguel; Pontes, A. J.; Simões, Ricardo – Product design for the health sector: usability issues in embedding tracing technologies in surgical instruments , 2010

Torres, L. M.; Silva, J. F.; Marques, A. T.; Nunes, J. P.; Marques, R. P. – Glass/polyvinyl chloride composites , 2010

Queirós, M. P.; Pontes, A. J. – Thermoelectrical regulation of microinjection moulds , 2010

Pettarin, V.; Pontes, A. J.; Viau, G.; Viana, J. C.; Frontini, P. M.; Pouzada, A. S. – Impact behavior of injected PP/nanoclay parts , 2010

Mendes, F.; Duarte, J.; Vieira, Armando; Gaspar-Cunha, A. – Feature selection for bankruptcy prediction: a multi-objective optimization approach , 2010

Rajaraman, V.; Hau, B. S.; Rocha, L. A.; French, P. J.; Makinwa, K. A. A. – Design of a flexible contact-mode piezoresistive detector for time-based high sensitivity acceleration sensing , 2010

Pettarin, V.; Brun, F.; Pontes, A. J.; Viana, J. C.; Pouzada, A. S.; Frontini, P. – Fracture toughness of injection moulded organoclay reinforced polypropylene composites , 2010

Brecx, B.; Cardon, Ludwig; Pontes, A. J. – Process simulation and morphology evolution of micromouldings , 2010

Nogueira, A. A.; Pouzada, P. S.; Martinho, P. G.; Pouzada, A. S. – A new way to produce conformal cooling channels by RPT for moulding blocks of the hybrid moulds , 2010-09

Oliveira, M.; Machado, A. V.; Nogueira, R. – Development of permeable reactive barrier for phosphorus removal , 2010

Teixeira, Cristina; Covas, J. A.; Stützle, Thomas; Gaspar-Cunha, A. – Optimization of Co-rotating twin-screw extruders using pareto local search , 2010

Velosa, J. C.; Nunes, J. P.; Silva, J. F.; Bernardo, C. A.; Marques, A. T. – Production of thermoplastic towpregs , 2010