Login
  • Slide image one
  • Slide image two
  • Slide image three
  • Slide image four
  • Slide image five
Home -> Publications -> 2013
PDF Print E-mail

2013 Scientific Performance

At the end of 2013 there were 28 PhD holding members and 59 researchers and post-graduation students working at the Institute, which in that year were responsible for the publication of 75 articles in peer-reviewed, 8 chapters of internationally edited books, 10 PhD and 36 MSc theses. Additionally, 86 communications were presented in international scientific conferences by members of IPC. This output is consistent with the trend of the last years, albeit with some variations from year to year. Concurrently, there was an undeniable consolidation of the international visibility of the members of the Institute, as a result of increasing editorial activities, of the consistent organization of scientific events and invitations for conferences and of the award of international prizes.

If you want to download PDF files of these papers, please contact the Secretariat. If you have already received access information, click here to download the PDFs.


Book Chapters

 

  1. Bernardo, G.; Bucknall, David, Recent Progress in the Understanding and Manipulation of Morphology in Polymer:Fullerene Photovoltaic Cells. Optoelectronics, In-Tech Publications, 207-227, 2013, (ISBN: 980-953-307-616-9);

  2. Bjorn, D.; Ferreira, L.; Ribeiro, C.; Martinho, P.G., Controlling real time processing variables in a hybrid injection mould. High Value Manufacturing - Advanced Research in Virtual and Rapid Prototyping, CRC Press/Balkema, London, 333-338, 2013, (ISBN: 978-1-138-00137-4 );

  3. Carneiro, O.S.; Ferrás, L.L.; Nóbrega, J.M.; Pinho, F.T., Effect of polymer melt wall slip on the flow balance of profile extrusion dies. Novel Trends in Rheology V, 59-71, 2013, (ISBN: 978-0-7354-1151-7);

  4. Oliveira, M.; Machado, A.V., Preparation of polymer-based nanocomposites by different routes. Nanocomposites: Synthesis, Characterization and Applications, NOVA Publishers, Zurich, 2013, (ISBN: 978-1-62948-227-9) [http://hdl.handle.net/1822/26120];

  5. Oliveira, M.; Machado, A.V., Rheology as a tool to follow hybrid nanocomposites preparation. AIP Conference Proceedings, 1526, 248-257, 2013.;

  6. Pereira, S.P.; Vuik, K.; Pinho, F.T.; Nóbrega, J.M., On the performance of a 2D unstructured computational rheology code on a GPU. Novel Trends in Rheology V, 72-89, 2013, (ISBN: 978-0-7354-1151-7);

  7. Pouzada, A.S.; Martinho, P.G.; Freitas, A.; Soares, R., Rapid Prototyping and Tooling technologies to produce moulding elements of injection moulds for large parts. High Value Manufacturing - Advanced Research in Virtual and Rapid Prototyping, CRC Press/Balkema, London, 327-332, 2013, (ISBN: 978-1-138-00137-4 );

  8. Silva, Jaime; Simões, R.; Lanceros-Méndez, S., Modeling carbon nanotube electrical properties in CNT/polymer composites. New Frontiers of Nanoparticles and Nanocomposite Materials – Novel Principles and Techniques, Springer-Verlag, Berlin, Vol 4 Vol 4, 287-295, 2013, (ISBN: 978-3-642-14696-1);

 

International Publications in Peer-reviewed Journals

 

  1. Araújo, R.F.; Silva, C.J.R.; Paiva, M.C.; Melle-Franco, Manuel; Proença. M.F., Efficient dispersion of multi-walled carbon nanotubes in aqueous solution by non-covalent interaction with perylene bisimides. RSC Advances, 3(46), 24535-24542, 2013;

  2. Azevedo, Gabriela; Hilliou, L.; Bernardo, Gabriel; Pinto, Isabel Sousa; Adams, Ralph W.; Nilsson, M.; Villanueva, R. D., Tailoring kappa/iota-hybrid carrageenan from Mastocarpus stellatus with desired gel quality through pre-extraction alkali treatment. Food Hydrocolloids, 31, 94-102, 2013 [http://hdl.handle.net/1822/20680];

  3. Barbas, J.M.; Machado, A.V.; Covas, J.A., Evolution of dispersion along the extruder during the manufacture of polymer-organoclay nanocomposites. Chemical Engineering Science, 98, 77-87, 2013;

  4. Barbas, J.M.; Machado, A.V.; Covas, J.A., In-line near-infrared spectroscopy: A tool to monitor the preparation of polymer-clay nanocomposites in extruders. Journal of Applied Polymer Science, (127), 4899-4909, 2013;

  5. Barbosa, C.N.; Simões, R.; Markus Franzen; Viana, J.C., Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene. Journal of Materials Science, 48(6), 2597-2607, 2013;

  6. Bernardo, G., Diffusivity of Alcohols in Amorphous Polystyrene. Journal of Applied Polymer Science, 127(3), 1803-1811, 2013;

  7. Bernardo, G.; Hilliou, l.; Cunha, Mara; Busani, T.; Pereira, Rui N., Impact of composition and morphology on the optical properties of Si-NC/P3HT thin films processed from solution. Applied Physics A: Materials Science and Processing, 113, 439-446, 2013;

  8. Bernardo, G.; Hilliou, l.; Cunha, Mara; Wiggers, Hartmut; Pereira, Rui N., Morphology control of thin P3HT-Si-NCs composite films for hybrid. Materials Science Forum, 730-732, 227-231, 2013;

  9. Bernardo, G.; Hilliou, l.; Viana, J.C.; Rodrigues, Alexandre; David G. Bucknall; Deb Nabankur, Low temperature solid state processing of pure P3HT fibers. AIP Advances, 3, 052116-1-052116-8, 2013;

  10. Botelho, Gabriela; Machado, A.V., UV Stability of Poly(Lactic Acid) Nanocomposites. Journal of Materials Science and Engineering B, 3(2), 75-83, 2013;

  11. Brostow, Witold; Sameer Deshpande; Travis Hilbig; Simões, R., Molecular dynamics computer simulation of scratch resistance testing of polymers: visualization. Polymer Bulletin, 70, 1457-1464, 2013;

  12. Brovelli, C.; Hilliou, l.; Hemar, Y.; Pais, Jorge C.; Pereira, P.; Crispino, M., Rheological characteristics of EVA modified bitumen and their correlations with bitumen concrete properties. Construction and Building Materials, 48, 1202-1208, 2013;

  13. Carneiro, O.S.; Nóbrega, J. M.; Mota, Armando R.; Silva, Carolina L.S., Prototype and methodology for the characterization of the polymer-calibrator interface heat transfer coefficient. Polymer Testing, 32(6), 1154-1161, 2013. [http://hdl.handle.net/1822/26048];

  14. Clain, S.; Machado, G.; Nóbrega, J.M.; Pereira, R., A sixth-order finite volume method for multidomain convection-diffusion problem with discontinuous coefficients. Computer Methods in Applied Mechanics and Engineering, 267, 43-64, 2013;

  15. Constantino, A.; Pettarin, Valeria; Viana, J.C.; Pontes, A.J.; Pouzada, A.S.; Frontini, P. M., Polypropylene/clay nanocomposites produced by shear controlled orientation in injection moulding: Deformation and fracture properties. Strojniski Vestnik/Journal of Mechanical Engineering, 50(9), 697-704, 2013;

  16. Correia, A.; S.M. Valashani; Francisco Pires; Simões, Ricardo, Modelling the mechanical behavior of polymer-based nanocomposites. Materials Science Forum, 730-732, 543-548, 2013;

  17. Costa, L.; Cramez, M.C.; Pontes, A.J., A study on shrinkage and warpage of rotational moulded polyethylene. Materials Science Forum, (730-732), 957-962, 2013;

  18. Costa, P.; Sencadas, V.; Simões, R.; Viana, J.C.; Lanceros-Méndez, S., Mechanical, electrical and electro-mechanical properties of thermoplastic elastomer styrene-butadiene-styrene/multiwall carbon nanotubes composites. Journal of Materials Science, 48(3), 1172-1179, 2013;

  19. Costa, P.; Ferreira, A.; Sencadas, V.; Viana, J.C.; Lanceros-Méndez, S., Electro-mechanical properties of triblock copolymer styrene-butadiene-styrene / carbon nanotube composites for large deformation sensor applications. Sensors and Actuators, A: Physical, 201, 458-467, 2013;

  20. Costantino, Alejandra; Pettarin, Valeria; Viana, J.C.; Pontes, A.J.; Pouzada, A. S.; Frontini, P. M., Morphology-performance relationship of polypropylene-nanoclay composites processed by shear controlled injection moulding. Polymer International, 62(11), 1589-1599, 2013 [http://hdl.handle.net/1822/26042];

  21. Cruz-Cunha, M.M.; Isabel Miranda; Nuno Lopes; Simões, R., An e-marketplace of healthcare and social care services: the perceived interest. The Learning Organization, 20(6), 406-418, 2013;

  22. Denchev, Z.; Dencheva, N.V.; Stribeck, N.; Motovilin, M.; Zeinolebadi, Ahmad; Funari, S. S.; Botta, Stephan, Nanostructure transitions and their relation to mechanical properties in polyethylene/polyamide 6 microfibrillar composites as revealed by SAXS/straining studies. Macromolecular Materials and Engineering, 298, 1100-1116, 2013 [http://hdl.handle.net/1822/24694];

  23. Dencheva, N.V.; Denchev, Z., Clay distribution and crystalline structure evolution in polyamide 6/ montmorillonite composites prepared by activated anionic polymerization. Journal of Applied Polymer Science, 130, 1228-1238, 2013. [http://hdl.handle.net/1822/24695];

  24. Dencheva, N.V.; Denchev, Z.; Pouzada, A.S.; Ana Sofia Sampaio; Rocha, A.M., Structure–properties relationship in single polymer composites based on polyamide 6 prepared by in-mold anionic polymerization. Journal of Material Science, 48, 7260-7273, 2013;

  25. Esteves, F.R.; Carvalho, Tiago; Pouzada, A.S.; Martins, C.I., The influence of processing on the aesthetic, morphological and mechanical properties of structural foam mouldings of high-impact polystyrene. Strojniski Vestnik/Journal of Mechanical Engineering, 59(11), 637-645, 2013;

  26. Esteves, F.R.; Pouzada, A.S.; Martins, C.I., Characterization of polypropylene structural foams for large part applications. Materials Science Forum, 730-732, 981-987, 2013;

  27. Ferrás, L.L.; Nóbrega, J.M.; Pinho, F.T., Implementation of Slip Boundary Conditions in the Finite Volume Method: New Techniques. International Journal for Numerical Methods in Fluids, 72, 724-747, 2013;

  28. Ferreira, A.J.S.; Ferreira, F.N.; Paiva, M.C., Textile Sensor Applications with Composite Monofilaments of Polymer / Carbon Nanotubes. Advances in Science and Technology, 80, 65-70, 2013;

  29. Ferreira, T.; Paiva, M.C.; Pontes, A.J., Dispersion of carbon nanotubes in polyamide 6 for microinjection moulding. Journal of Polymer Research, 20(301), 2013;

  30. Gaspar-Cunha, A.; Covas, J. A., The plasticating sequence in barrier extrusion screws part I: modeling. Polymer Engineering and Science, 1-13, 2013 [http://hdl.handle.net/1822/26416];

  31. Gonçalves, N. D.; Ribau, A. M.; Carneiro, O.S.; Nóbrega, J.M., Computer Aided Design of Extrusion Dies for Complex Geometry Profiles. Materials Science Forum, 730-732, 495-500, 2013 [http://hdl.handle.net/1822/20125];

  32. Gonçalves, N.D.; Carneiro, O.S.; Nóbrega, J. M., Design of complex profile extrusion dies through numerical modeling. Journal of Non-Newtonian Fluid Mechanics, 200, 103-110, 2013 [http://hdl.handle.net/1822/25890];

  33. Jamali, S.; Paiva, M. C.; Covas, J. A., Dispersion and re-agglomeration phenomena during melt mixing of polypropylene with multi-wall carbon nanotubes. Polymer Testing, 32, 701-707, 2013. [http://hdl.handle.net/1822/24350];

  34. Javier R. Rocha; Kevin Z. Yang; Travis Hilbig; Brostow, Witold; Simões, R., Polymer indentation with mesoscopic molecular dynamics. Journal of Materials Research, 28(21), 3043-3052, 2013;

  35. Lafranche, E; Martins, C.I.; Oliveira, Vânia; Patricia Krawczak, Prediction of tensile properties of injection moulding flax fibre reinforced polypropylene from morphology analysis. Key Engineering Materials, 554-557, 1573-1582, 2013;

  36. Lanoë, Thomas; Simões, C.L.; Simões, R., Improving the environmental performance of bedding products by using life cycle assessment at the design stage. Journal of Cleaner Production, 52, 155-164, 2013;

  37. Machado, A.V., Nanocomposites of poly(ε-caprolactone) doped with titanium species. Journal of Materials Science, (48), 3578-3585, 2013;

  38. Machado, A.V., Durability of PCL Nanocomposites Under Different Environments. Journal of Polymers and the Environment, (21), 710-717, 2013;

  39. Machado, A.V., Development of solid polymer electrolytes based on poly(vinylidene fluoride-trifluoroethylene) and the [N1 1 1 2(OH)][NTf2] ionic liquid for energy storage applications. Solid State Ionics, 253, 143-150, 2013;

  40. Mota, A.R.; Duarte, L.; Rodrigues, D.; Martins, A.C.; Machado, A.V.; Vaz, F.; Fiedler, P.; Haueisen, J.; Nóbrega, J.M.; Fonseca, C., Development of a Quasi-Dry Electrode for EEG Recording. Sensors and Actuators, A: Physical, 199, 310-317, 2013;

  41. Moura, I.; Machado, A.V.; Nogueira, R.; Bounor-Legare, V., Effect of PCL and EVA molar mass on the development of sustainable polymers. Soft Materials, 12(1), 88-97, 2013;

  42. Novais, R. M.; Simon, Frank; Potschke, Petra; Villmow, Tobias; Covas, J. A.; Paiva, M. C., Poly(lactic acid) composites with poly(lactic acid)-modified carbon nanotubes. Journal of Polymer Science, Part A: Polymer Chemistry, 51, 3740-3750, 2013 [http://hdl.handle.net/1822/26079];

  43. Nunes, J.P.; Silva, J. F:, Production of Thermoplastic Matrix Towpregs for Highly Demanding and Cost-Effective Commercial Applications. Materials Science Forum, Vols. 730-732(Materials Science Forum IV), 1030-1035, 2013;

  44. Nunes, J.P.; Silva, J. F.; Novo, P. J., Processing Thermoplastic Matrix Towpregs by Pultrusion. Advances in Polymer Technology, 32(S2), E302-E312, 2013;

  45. Oliveira, M.; Machado, A.V., Preparation and characterization of ethylene-vinyl acetate nanocomposites: enhanced flame retardant. Polymer International, 62, 1678–1683, 2013. http://onlinelibrary.wiley.com/doi/10.1002/pi.4466/full;

  46. Oliveira, M.; Machado, A.V., Microscopy as a powerful technique to characterise polymer matrix nanocomposites. Microscopy and Microanalysis, 19(S4), 131-132, 2013;

  47. Oliveira, M.; Machado, A.V., The Role of Phosphorus on Eutrophication: A Historical Review and Future Perspectives. Environmental Technology, 2, 117-127 2013. http://www.tandfonline.com/doi/abs/10.1080/21622515.2013.861877#.Uuomb_ZLEeM;

  48. Oliveira, M.; Nogueira, R.; Machado, A.V., Hybrid nanocomposite preparation in a batch mixer and a twin-screw extruder. Advances in Polymer Technology, 32(S1), E732-E740, 2013 [http://hdl.handle.net/1822/23381];

  49. Peralta, Elvira; Silva, Hugo M.R.D.; Williams, R. Christopher; Rover, Marjorie; Machado, A. V., Development of an innovative bio-binder using Asphalt-rubber technology. International Journal of Pavement Research and Technology, 6(4), 447-456, 2013. [http://hdl.handle.net/1822/26303];

  50. Pettarin, V.; Brun, F.; Viana, J.C.; Pouzada, A.S.; Frontini, P. M., Toughness distribution in complex PP/nanoclay injected mouldings. Composites Science and Technology, 74, 28-36, 2013;

  51. Pettarin, Valeria; Viau, Gastón; Fasce, L.; Viana, J.C.; Pontes, A.J.; Frontini, P. M.; Pouzada, A. S., Uni- and biaxial impact behaviour of double-gated nanoclay-reinforced polypropylene injection mouldings. Polymer Engineering and Science, 53(4), 724-733, 2013. [http://hdl.handle.net/1822/20853];

  52. Pirotta, F.J.C.; Ferreira, E.C.; Bernardo, C.A., Energy recovery and impact on land use of Maltese municipal solid waste incineration. Energy, 49(1), 1-11, 2013. [http://hdl.handle.net/1822/24303];

  53. Rabuski, Mauro; NETTO, A.C.S.; Pontes, A.J., Assessment of the shrinkage and ejection forces of reinforced polypropylene based on nanoclays and short glass fiber. Materials Science Forum, (730-732), 969-974, 2013;

  54. Ribau, A.M.; Gonçalves, N.D.; Silva, Carolina L.S.; Nóbrega, J. M.; Carneiro, O.S., Modelling the calibration/cooling stage of complex thermoplastic profiles. Materials Science Forum, 730-732, 537-542, 2013 [http://hdl.handle.net/1822/20144];

  55. Rodrigues, A.L.; Machado, A.V.; Nóbrega, J.M.; Albuquerque, A.; Brito, A.G.; Nogueira, R., A poly-ε-caprolactone based biofilm carrier for nitrate removal from water. International Journal of Environmental Science and Technology, 1-6, 2013;

  56. Rodrigues, Alexandre; Castro, M.C.R.; Farinha, A.S.F.; Oliveira, M.; Tomé, J.P.C.; Machado, A.V.; Raposo, M.M.M.; Hilliou, l.; Bernardo, G., Thermal stability of P3HT and P3HT:PCBM blends in the molten state. Polymer Testing, 32, 1192-1201, 2013;

  57. Santos, R.M.; Botelho, G.L.; Cramez, M.C.; Machado, A.V., Outdoor and accelerated weathering of acrylonitrile-butadiene-styrene (ABS): A correlation study. Polymer Degradation and Stability, 98, 2111-2115, 2013;

  58. Santos, R.M.; Machado, A.V., Influence of the testing conditions on the efficiency and durability of stabilizers against ABS photo-oxidation. Polymer Testing, (32), 78-85, 2013;

  59. Sepúlveda, A.T.; Guzman de Villoria, R; Viana, J.C.; Pontes, A.J.; Wardle, B L; Rocha, Luís A., Full elastic constitutive relation of non-isotropic aligned-CNT/PDMS flexible nanocomposites. Nanoscale, 5(11), 4847-4854, 2013;

  60. Silva, Marco Aurélio Pinto; Martins, R. S.; Carvalho, H.; Nóbrega, J.M.; Lanceros-Méndez, S., Extrusion of poly (vinylidene fluoride) recycled filaments: effect of the processing cycles on the degree of crystallinity and electroactive phase content. Polymer Testing, 32(6), 1041-1044, 2013;

  61. Simões, C.L.; Pinto, Lígia; Bernardo, C.A., Environmental and economic assessment of a road safety product made with virgin and recycled HDPE: A comparative study. Journal of Environmental Management, 114, 209-215, 2013;

  62. Simões, C.L.; Pinto, Lígia; Simões, R.; Bernardo, C.A., Integrating environmental and economic life cycle analysis in product development: a material selection case study. International Journal of Life Cycle Assessment, 18(9), 1734-1746, 2013;

  63. Simões, C.L.; Simões, R.; Carvalho, José; Pontes, A.J.; Bernardo, C.A., The quest for a sustainable product: An environmental study of tyre recyclates. Materials & Design, 52, 196-206, 2013;

  64. Simões, R.; Viana, J.C.; Dias, Gustavo; Cunha, A.M., Mechanical Behavior of the Lamellar Structure in Semi-Crystalline Polymers. Materials Science Forum, 730-732, 1006-1011, 2013;

  65. Song, Wenlong; Oliveira, M.B.; Sher, P,; Gil, S.; Nóbrega, J.M.; Mano, J.F., Bioinspired methodology for preparing magnetic responsive chitosan beads to be integrated in a tubular bioreactor for biomedical applications. Biomedical Materials, 8(4) 045008-, 2013;

  66. Teixeira, P.; Pontes, A.J.; Henriques, E., Effect of the Injection Moulding Processing Conditions on Biopolymers Final Properties. Materials Science Forum, (730-732), 20-25, 2013;

  67. Teixeira, P.F.; Hilliou, l.; Covas, J.A.; Maia, J.M., Assessing the practical utility of the hole-pressure method for the in-line rheological characterization of polymer melts. Rheologica Acta, 52, 661-672, 2013;

  68. Travis Hilbig; Brostow, Witold; Simões, R., Simulating scratch behavior of polymers with mesoscopic molecular dynamics. Materials Chemistry and Physics, 139, 118-124, 2013;

  69. Todorov, Lyudmil; Martins, C.I.; Viana, J.C., In Situ WAXS/SAXS Structural Evolution Study During Uniaxial Stretching of Poly(ethylene therephthalate) Nanocomposites in Solid State: Poly(ethylene therephthalate)/Montmorillonite Nanocomposites. Journal of Applied Polymer Science, 128, 2884-2895, 2013;

  70. Vardasca, R; Costa A; Mendes, P.; Novais, P.; Simões, R., Information and Technology Implementation Issues in AAL Solutions. International Journal of E-Health and Medical Communications,5 (2), 1-17, 2013;

  71. Vasco, J.C.; Pouzada, A.S., A study on microinjection moulding using moulding blocks by additive micromanufacturing. International Journal of Advanced Manufacturing Technology, 69(9-12), 2293-2299, 2013 [http://hdl.handle.net/1822/26113];

  72. Viana, J.C.; Todorov, Lyudmil, Structure-properties relationships in processed poly(ethylene terephthalate). Key Engineering Materials, 554-557, 1757-1762, 2013;

  73. Vieira, D. J.; Meireles, J.F.B. ; Nunes, J.P., Improving the Dynamical Behaviour of a Laser Cutting Equipment by Using a Carbon Fibre Composite Main Structural Runway Frame. Materials Science Forum, Vols. 730-732(Materials Science Forum IV), 349-354, 2013;

  74. Zhiltsova, T. V.; Oliveira, M. S. A.; Ferreira, J. A.; Vasco, Joel Oliveira Correia; Pouzada, A. S.; Pontes, A.J., Polymer flow dynamics in microimpressions: an experimental approach. Polymer Testing, 32(3) 567-574, 2013. [http://hdl.handle.net/1822/23217];

  75. Zhiltsova, T. V.; Oliveira, M. S. A.; Vasco, Joel Oliveira Correia; Pouzada, A.S.; Pontes, A.J., Influence of mesh discretization on the prediction of polymer flow behaviour in microcavities. Materials Science Forum, (730-732), 525-530, 2013. [http://hdl.handle.net/1822/14057]


PhD Theses

 

  1. Cordeiro, Douglas Faria, Simulação numérica de escoamentos bifásicos com ISPH, Tese de doutoramento em Ciência e Engenharia de Polímeros e Compósitos, 2013;

  2. Correia, Mário António Correia, Modelling the ejection friction in injection moulding, Programa Doutoral em Ciência e Engenharia de Polímeros e Compósitos, 2013;

  3. Costa, Pedro Filipe Ribeiro, Development of mechanical, electrical and electromechanical properties of copolymer styrene-butadiene-styrene with carbon nanotubes composites, Programa Doutoral em Engenharia de Materiais, 2013;

  4. Costa, Sidonie Fernandes, Free form extrusion – extrusion of 3D componentes using complex polymeric systems, Programa Doutoral em Ciência e Engenharia de Polímeros e Compósitos, 2013;

  5. Loureiro, Nuno Alexandre de Oliveira Calçada, Sustainable automotive components for interior door trims, Programa Doutoral em Líderes para Indústrias Tecnológicas, 2013;
     
  6. Novais, José Fernando Pinheiro, Desenvolvimento de linhas de costura com alma e avaliação do desempenho na costura, Programa Doutoral em Engenharia Têxtil, 2013;
     
  7. Peralta, Elvira Joana Ferreira, Micro-analysis of Physico-Chemical Interaction between the components of bitumen mixtures with rubber, Programa Doutoral em Engenharia Civil, 2013;
     
  8. Santos, Raquel Miriam Barbosa dos Santos, Photo-oxidative degradation and Stabilization of Acrylonitrile-butadiene-styrene (ABS), Programa Doutoral em Ciência e Engenharia de Polímeros e Compósitos, 2013;
     
  9. Silva, Jaime Oliveira, Study and optimization of the macroscopic response of carbon based nanocomposites for advanced applications, Programa doutoral Física-Map-Fis, 2013;
     
  10. Teixeira, Cristina Ferreira, Designing screws for polymer compounding in twin-screw extruders, Tese de doutoramento em Ciência e Engenharia de Polímeros e Compósitos, 2013;

 

MSc Theses

 

  1. Ali Wajid, A contribution towards the on-line extensional characterization of polymer melts, Mestrado em Reologia Aplicada à Engenharia, 2013;
     
  2. Alves, P.T., Estudo sobre coextrusão de polímeros fundidos, Mestrado Integrado em Engenharia de Materiais, 2013;
     
  3. Araújo, A.M., Linhas de soldadura em extrusão de perfis, Mestrado em Propriedades e Tecnologia de Polímeros, 2013;
     
  4. Carvalho, J. P., Definição de condições de pintura de peças para autorrádio, Mestrado Integrado em Engenharia de Materiais, 2013;
     
  5. Castro, B. F., Estudo e Caracterização Mecânica de Compósitos Reforçados com Fibras Naturais, Mestrado em Engenharia Mecânica, 2013;
     
  6. Coelho, A. A. S., Desenvolvimento morfológico sob deformação de nanocompósitos de PET e nanotubos de carbono, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  7. Correia, R. N. F., Estudo e avaliação experimental de tecnologia IMR (in-mould reinforcement), Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  8. Correia, T. M. M., Moldação flexível de circuitos elétricos com polímeros condutores, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  9. Costa, M. P., Estudo do comportamento do fluxo em  Microcavidades na microinjeção, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  10. Duro, A. C., Desenvolvimento e Caracterização de Compósitos Reforçados com Fibras de Linho e Sisal, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  11. Ferreira, L.P., Estudo da processabilidade e caracterização de peças moldadas por Reaction Injetion Molding de Poliuretano, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  12. Ferreira, V., Soldadura por laser de placas de propileno produzidas por moldação por compressão, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  13. Gomes, J. M. F., Aspetos morfológicos de espumas estruturais com pigmentos metálicos, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  14. Gonçalves, J. C., Estudo da influência de nanotubos de carbono nas propriedades de revestimentos de poliuretano, Mestrado Integrado em Engenharia de Materiais, 2013;
     
  15. Leite, A. G., Injeção de termoplásticos de fibras longas - influência das condições de processamento nas propriedades mecânicas em fluxo radial, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  16. Machado, A. F. S, Estudo do empeno e contração de peças moldadas por injeção em compósitos de PP com pigmentos metálicos, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  17. Marques, S., Argamassas decorativas com incorporação de resíduos, Mestrado Integrado em Engenharia Civil, 2013;
     
  18. Martinho, L., Revestidos de PVC para estofos: causas da formação de fissuras e identificação do mecanismo de falha, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  19. Matos, S., Desenvolvimento de modelo para previsão do coeficiente de transferência de contacto polímero-calibrador, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  20. Mendes, C. R., Melhoria do Design de calçado numa perspetiva inclusiva, Masters in Product Design and Development – IPCA, 2013;
     
  21. Meireles, D. R., Development and optimization of a child bicycle frame in new materials, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  22. Mota, C., Desenvolvimento de Embalagem Biodegradável para Aplicação na Agricultura, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  23. Neto, L. C., Moldação por injeção de materiais biodegradáveis para peças de paredes finas, Mestrado Integrado em Engenharia de Materiais, 2013;
     
  24. Nunes, H. G., Preparação de filamentos compósitos com nanopartículas de carbono, Mestrado Integrado em Engenharia de Materiais, 2013;
     
  25. Oliveira, Rui, Avaliação da biodegradabilidade de nanocompositos, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  26. Peneva, P. M., Preparation of Nanospheres Based on Copolymeric Poly(cyanoacrylates)  Useful for Drug Delivery Systems, 2013;
     
  27. Pereira, M., Nanocompósitos de PLA para aplicação em embalagem alimentar, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  28. Pinto, R. F., Estudo e avaliação experimental de tecnologia IMR (in-mould reinforcement), Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  29. Rodrigues, D. S., Chemical Functionalization of Nanodiamonds and Formation of PET Nanocomposites, Mestrado em Micro/Nanotecnologias, 2013;
     
  30. Rodrigues, P. A., Estudo da reutilização de EVA reticulado na indústria do calçado, Mestrado em Gestão Ambiental, 2013;
     
  31. Salgado, T.P., Produção de espumas para calçado ortopédico, Mestrado Integrado em Engenharia de Materiais, 2013;
     
  32. Silva, C. R., Reactive Processing and Structure-Properties Relationship in Thermoplastic Composites based on Polyamides Reinforced by Synthetic Titanosilicates, Mestrado Integrado em Engenharia de Polímeros, 2013;
     
  33. Silva F., Desenvolvimento de sistemas de encapsulamento para integração em protótipos de vestuário/têxtil, Masters in Product Design and Development – IPCA, 2013;
     
  34. Sitotaw, Y.W., The Effect of Weld Lines in The Extrusion Process, Mestrado em Reologia Aplicada à Engenharia, 2013;
     
  35. Vale B., Banca de Cozinha: Projeto de Design Universal, Masters in Product Design and Development – IPCA, 2013;
     
  36. Vasconcelos, J. V. Estudo de soluções de baixo impacto ambiental para revestimento têxtil, Mestrado Integrado em Engenharia de Polímeros, 2013;

 

 


 
Last Updated on Thursday, 15 January 2015 15:09